Air Conditioning and Heating TipsGet a Coupon

Selecting an Efficient Heating System for Your Myrtle Beach Area Home

Even if you live in a temperate climate like Myrtle Beach where it stays relatively mild in the winter months, an efficient heating system is a necessary element to ensure a safe and comfortable indoor environment. Not all systems, however, are created equal. Whether you’re considering replacing your current heater or you’re building a new home, choosing the wrong furnace or heat pump can affect not only your comfort but also your pocketbook.

What Type of Fuel or Energy Source Is Available?

Usually, furnaces run on gas, oil, or electricity. If your current home isn’t already set up with a gas line or a storage and distribution system for a gas or oil burner, an electric heat system may be your best – and least expensive – bet. If you’re building a new home or you live in an area where gas or fuel oil is more cost-effective, however, it’s best to weigh your options more carefully or listen to the recommendations of your HVAC contractor.

What Type of Climate Do You Live In?

Make sure you have an efficient heating system in your Myrtle Beach area home.

People who live in Northern, colder climates need a good and efficient heating system. That’s why furnaces and boilers are more common in these areas. Those who live in milder climates like the Grand Strand will do better with an electric heat pump or a heater and AC combination.

How Much Will It Cost?

Cost doesn’t just apply to the system as a whole, but also to the cost of installing, running, and maintaining your system. Newer systems usually have a sticker on them that offers an estimate of how much they will cost to run over time. You can also get this information from your local utility or oil supply company and from a qualified HVAC contractor.

Knowing more about HVAC systems and how they heat your home should narrow down your options considerably.

Make sure you have an efficient heating system in your Myrtle Beach area home. Call Brown & Reaves Services today at 843-497-9867, or fill out our short form to schedule a service call to make sure you are running with the most efficient heating system possible.

For more timely tips, don’t forget to find us and like us on Facebook and follow us on Twitter.

Improving the Efficiency of Your Myrtle Beach Home Heating System

Older homes with inefficient heating systems poise a challenge to people who love old charm with modern technology. Most homeowners will improvise with some of the heating methods used in historical structures. Others will combine today’s heating technology with old tradition. Making the correct choice is the key to providing comfort and efficiency in your Myrtle Beach home heating system. Cost concerns are another area where homeowners want to be able to get a return on their investment.

Selecting the Perfect Solution

Understanding what system will work properly for an older home should be determined through an energy assessment. Santee Cooper and Horry Electric can do this audit free of charge. They perform tests to determine if the house needs upgrades to prevent heat loss.

Insulation, Weather Stripping, and Door and Window Sealing

Make sure your Myrtle Beach home heating system is running at its best possible efficiency.

Those upgrades could include additional insulation in walls, ceilings, and below flooring. Old windows might need replacement or be weatherized to prevent heat loss. An existing duct system connected together could have leaks that have to be repaired. Old houses with high ceilings have a reputation of being hard to heat. Additionally, the actual square footage of the home can have a tremendous impact on heating.

Installing Programmable Thermostat

A new heat pump or natural-gas furnace with a programmable thermostat will keep an old home warm, but upgrades should be performed to get the best efficiency out of the heating system. The duct system should be sealed with mastic to prevent heat loss, and the existing Myrtle Beach home heating system should be tuned up. Windows should be upgraded to energy-efficient products or weatherized. Likewise, insulation should be added in the attic and walls. Additionally, unusable fireplaces should be sealed off or have the damper closed.

Home energy improvements can reduce currently high utility bills. It makes great economic sense to examine the current conditions of the home to improve the energy efficiency of your Myrtle Beach home heating system. Homeowners can find out more about what to do when it comes to heating an old house by discussing their situation with one of our trusted professionals at Brown & Reaves Services in Myrtle Beach. Call us today at 843-497-9867, or fill out our short form to schedule a service call to make sure your Myrtle Beach home heating system is running at its best possible efficiency.

For more timely tips, don’t forget to find us and like us on Facebook and follow us on Twitter.

Dangers of a Carbon Monoxide Leak from a Dysfunctional Heating Unit

Every year, around 200 people die from non-fire related carbon monoxide poisoning. Carbon monoxide, or CO, is colorless and odorless, so many people don’t even know they’re already breathing in the gas in their homes. A carbon monoxide leak comes from incorrectly-vented, fuel-burning furnaces as well as fumes from burning fuel for vehicles, lanterns, and grills, among others. The symptoms of CO poisoning are life-threatening. If you heat your home using natural gas, then there are a few things you need to know.

A carbon monoxide leak comes from incorrectly-vented, fuel-burning furnaces as well as fumes from burning fuel for vehicles, lanterns, and grills, among others..

Taking Extra Care When Using Gas for Heating

Most people know that when it comes to heating, gas is one of the best types of fuel around. It produces sufficient heat and is very cost-effective. As prices of natural gas continue to decrease, it makes it even more affordable to heat and cook with. There are numerous things within the heating system, however, that can go wrong and cause a carbon monoxide leak. For instance, the heat exchanger can develop pin dot holes over time. This is the combustion unit where the gas is turned into heat, and CO can easily slip through these holes. Homes that have moist environments, specifically those closest to the ocean, will have more problems with rust on their unit than others.

Performing Regular Maintenance

It is important to note that the fittings can also be an important area where you could experience a carbon monoxide leak. It is imperative to have regular preventative maintenance done to check for such occurrences within the heating system. Some signs of CO poisoning are headaches, dizziness, shortness of breath, confusion, general malaise, and nausea. You may think you have caught a bug that is going around, but there could be something more vicious lurking in your home.

Using a Carbon Monoxide Detector

If you live in a home that heats with gas, you need to have a carbon monoxide detector. These small detectors can sense traces of the deadly gas in the air. They work like smoke detectors and let you know when levels of CO in the air is too high. Have your local HVAC company inspect your unit for any possibility of a carbon monoxide leak to make sure your family is safe before you start using your heating system in the colder months.

Call Brown and Reaves Services today at 843-497-9867, or fill out our short form to schedule a service call to make sure you don’t have any potential issues going on as a result of a carbon monoxide leak, and to seal those leaks if you do.

For more timely tips, don’t forget to find us and like us on Facebook and follow us on Twitter.

Heating System Failure – Should I Repair or Replace the Old System?

Nothing can be more annoying than to turn on the central heat system during a cold spell only to notice it wants to stay in hibernation. Locating a service technician during those moments can add to the frustration. The majority of furnace problems begin with the unit giving you warning signs that it needs servicing by professionals.

Learn about things to watch for and ways to know if you're experiencing a heating system failure, call Brown & Reaves Services today at 843-497-9867

Problems That Can Interfere With Furnace Operation

A thermostat could be the culprit with the furnace failing to operate. Make sure the switch is turned on to the heat setting. You have to adjust the control dial to at least five degrees over the current room temperature for the furnace to click on. Make sure the power is on at the thermostat by checking the circuit breaker or fuse box.

Another cause of the problem might be a clogged air filter. If the heating system is on but heat flow is limited through the vents, then the problem suspected would be an extremely dirty filter. Every homeowner should purchase several filters for replacement during a heating cycle when they use the system continuously. Check filters often and replace them after four to six weeks of use even if they still look clean.

If the heating system problem isn’t corrected with the minor procedures listed above, turn the power off at the unit and turn the breaker off at the fuse box. You may have a serious problem that could include blower motor failure. A qualified technician would have to check the furnace to repair the problem.

Problems With Heat Pump Operation

Heat pumps can give many similar problems as a gas furnace. After going through the procedures listed above, make sure the unit outside is free of obstructions. Leaves, plastic trash bags, and other items can block the flow of air. Over a period of time, they can cause serious damage to the unit.

Never try to make any repairs during a heating system failure unless you have advanced knowledge of what you’re doing. You can do more damage to the unit by doing unskilled repairs. A service call by local heating specialists can determine problems within your system. They usually recommend replacing the old system if the unit will cause costly repairs in the future.

To learn more things to watch for and ways to know if you’re experiencing a heating system failure, call Brown & Reaves Services today at 843-497-9867, or fill out our short form and someone will contact you as quickly as possible to answer any questions you may have about your system.

For more timely tips, don’t forget to find us and like us on Facebook and follow us on Twitter.

The Benefits of Natural Gas and Electrical Heating for Homeowners

Natural gas is the most popular type of heating fuel used in North America. Propane ranks second in many rural areas. Electricity is used as a third option to stay warm during colder weather. Some homeowners will use both a fuel and electrical source to heat their homes.

The Natural Gas Advantage

Advantages of using natural gas to heat your home, when available.

The cost of installation and operation of a natural-gas system is relatively low compared to other heating methods. Natural gas provides a safely delivered heat source that consumers depend on. Homeowners prefer gas heating for the price and ability to warm quickly, and it doesn’t need to be stored in large quantities inside a tank. It can provide warmth through a wall-mounted heater or through a central heating furnace.

Busy lifestyles require heating on demand. A central heating system that uses natural gas allows families the convenience to keep their home warm while away at work or doing other activities outdoors. The combustion process for natural gas provides the cleanest burning fossil fuel available. Central heating systems that are professionally serviced through yearly maintenance procedures provide homeowners with a clean and reliable heat source.

Using Electricity for Heat

An electric heat pump is another extremely efficient method used in modern homes to keep them comfortable and toasty. It provides warmth and a clean combustion-free atmosphere. Electric rates and the amount of time the system is used are factors in determining energy costs. The system is virtually a reliable heat source unless a power failure or interruption in service happens.

Infrared heating is another method used in order to keep homes warm. Portable infrared heaters are an excellent choice in providing warmth to rooms that are generally hard to heat. The units are extremely efficient and provide safe heat without the risk of fire compared to traditional portable heaters. Zone heat makes these environmentally friendly units a popular choice for homeowners.

Always keep in mind that the amount of energy used will determine how much money is spent to keep a home warm. Lowering the thermostat when everyone is away can keep those costs low. The installation of a smart thermostat controlled by a mobile phone app can allow a homeowner to adjust the temperature indoors when the family is about to return home.

To learn more things to watch for and optional ways to heat your home, call Brown & Reaves Services today at 843-497-9867, or fill out our short form and someone will contact you as quickly as possible to answer any questions you may have about your current heating system.

For more timely tips, don’t forget to find us and like us on Facebook and follow us on Twitter.

Make Your Home More Energy-Efficient for Heating and Cooling Comfort

A home energy assessment should be your first step in determining why your heating and cooling costs remain high. An auditor uses diagnostic equipment to analyze areas inside the home to determine what solutions can be implemented to solve likely problems. Your local power company might offer this service to you free of charge.

Water Heater Efficiency

The water heater in your home is one of those on-demand appliances most people never think about unless they need to use hot water. The heater temp setting is located at the side of the tank. A recommended temperature of 120 degrees will keep the tank warm enough to provide hot water. An electrician can install a switch so you can control when you need to heat water inside the tank. Installing an insulation blanket around the tank can help save money on electric bills.

The Central Heating Unit

Scheduling a service call with Brown & Reaves Services is an important procedure that needs to be done annually. Most homeowners neglect having professionals service their heating systems each year. This leads to surprise repairs, which they probably could avoid if they had their heating system maintained.

Changing filters can be done by almost anyone. You should at least change the filter every six to eight weeks during heating season. Other problems can develop over time, which require technicians to diagnose and service the unit. You should start thinking about a replacement if your current heating system is over 15 years old.

Doors and Windows

Worn doors and windows are an escape route for heat and cool air. The same can be said about their entry inside a home. You can check for leaks around them by lighting a candle on a windy day and then moving the candle around the frames to check for a flickering flame. This can quickly allow you to determine where any leaks might be located. Weather stripping and caulking are proven methods to eliminate drafty windows and doors. Upgrading windows or doors can decrease energy costs. They also add value to your home once you decide to put it up for sale in the future.

Call Brown & Reaves Services today at 843-497-9867, or fill out our short form and someone will contact you as quickly as possible to answer any questions you may have about your heating system.

For more timely tips, don’t forget to find us and like us on Facebook and follow us on Twitter.

Copy Protected by Chetan's WP-Copyprotect.